FabFilter has upgraded their excellent FabFilter Pro-Q Equalizer Plug-In With Dynamic EQ to version 3.0. Pro-Q 3.0 introduces dynamic EQ, surround support, per-band mid/side processing, and much more. The plug-in is available for both Windows and MacOS and comes in the VST and VST 3, Audio Units, AAX, and AudioSuite plug-in flavors.
Pro-Q 3 adds the ability to switch any of its 24 bands to Dynamic EQ mode, just raise or lower the Dynamic Range ring around the Gain knob to apply smooth compression or expansion to that band. An intelligent algorithm automatically chooses program-dependent attack, release, and knee settings, while the Threshold can be set automatically, according to the input signal level, or manually, and the dynamic EQ bands continue to operate with analog matching and support Linear Phase mode.
FabFilter Pro-Q3 Features:
» Mastering-grade EQ plug-in with exceptional sound quality
» Up to 24 bands with a huge range of filter types
» Dynamic EQ option for every band
» 6-96dB/octave slopes for all filter types
» Additional Brickwall slope for the High Cut and Low Cut filters
» Per-band Stereo, Left, Right, Mid, or Side mode
» Zero Latency, Natural Phase, and Linear Phase processing modes
» Efficient processing and low memory usage
» Surround support, including Dolby Atmos 7.0.2 and 7.1.2 formats with flexible surround channel linking
» Adapts automatically to stereo, mono, and surround channel layouts
» Intelligent multiband selection and editing
» Intelligent band solo mode
» Powerful real-time spectrum analyzer
» External spectrum visualization from any other Pro-Q 3 instance in the session, including collision detection
» Spectrum Grab: grab and adjust a peak directly in the spectrum analyzer
» EQ Match for imposing the tonal characteristics of one signal on another
» Piano Display switches the frequency scale to musical note values
Pro-Q 3 works with all major surround formats, up to Dolby Atmos 7.1.2. The plug-in automatically configures itself to the multichannel format of the hosting surround track, and an intuitive selection panel enables EQ adjustment of multiple channels together. Pro-Q has long been able to work its equalization magic on the mid or side channels in a stereo signal, as well as left and right, and this functionality becomes even more flexible with Pro-Q 3. Each individual band can now be set to process only the Mid, Side, Left, Right, or Stereo channels, so users can get truly surgical with their stereo frequency-shaping on a band-by-band basis.
Pro-Q 3 adds to Pro-Q 2’s filter types with the all-new Flat Tilt shape, applying a flat tilting correction curve to the entire audible spectrum. And for those occasions when even the super-steep 96dB/ octave roll-off slope isn’t precise enough, the Low and High Cut filter types can now be set to Brickwall mode for the ultimate in top/bottom attenuation. Pro-Q 3’s spectrum analyzer makes it easier than ever to find and correct problem frequencies in the mix. Activate the new collision detection to view clashes between the source signal and the spectrum of any other Pro-Q 3 instance in the session, and get an instant handle on the most important peaks in Spectrum Grab mode with frequency/note labels.
FabFilter’s Pro-Q 3 is now available now for $179 / €149 / £134.
FabFilter
