Stack3D Solutions Synth Stand Review

» Lea esta reseña en español.

With the Rise Of The Micro Studio and the plethora of new mini sound modules that have appeared from Roland, Korg, Behringer, 1010Music and others, the need for savvy stands has created a burgeoning market. Entrepreneurs from all over the planet have stepped up with a variety of solutions to meet the demand.

For a limited time only! Up to 80% off all Waves Bundles. PLUS click the banner above or the Go button for an additional 10%! This is Waves best deal yet! Get yours today before this special ends! Go!

We’ve tested a variety of offerings, but each one not only had questionable build quality, but also had price points that didn’t make sense for the materials utilized. Worse, some manufacturers simply copied poor designs and offered them as their own innovations. We embarked on a mission to find the best stand when setting up a micro studio and our choice may surprise you.

We embarked on a mission to find the best stand and our choice may surprise you…

We looked at plastic designs, clear acrylic, wood, and even metal, but the best, reasonably-priced small sound module design we found is from Stack3D Solutions, a one-man operation 3D printing stands from his home in Port Angeles, Washington, USA. At first, we were skeptical. Products that are 3D printed are usually rough around the edges – literally – and vary from one printing to the next. Worse, they often tend to be flimsy and weak, not something you want supporting one of your beloved modules. What we received from Stack3D Solutions upended every one of our notions and opened our eyes what can be accomplished with this technology for studio use.

We received our sample and were immediately taken on the quality of the printing. It certainly wasn’t perfect, but there weren’t overly sharp edges, or weird “hairs” emerging from odd angles, or unsightly flat surfaces. The only indication that this was 3D printed was some grain on the undercarriage of the unit and some seams. Even better, Stack3D Solutions embedded rubber insets on the spars to protect and cushion your modules while being supported. This even had the effect of keeping your gear securely in place, prohibiting them from sliding off, or what we call “unscheduled dismounts.”

The lean angles were also well thought out. Your gear can easily be tweaked while either being on the main level of your studio, or a shelf above. The only caveat is that the stands are not adjustable vertically or horizontally, The stand is 9″ wide and the supporting spars are 3″ above the bottom ledge, so if your module is smaller than that, it won’t work with this stand unless you employ a thin piece of plastic or cardboard as a backing. That said, even some of the smallest modules we tested, including 1010Music’s Lemondrop and Fireball, Behringer’s JT-4000 and ProVS, and other smaller units all fit quite well. Larger sound modules such as Korg Volca’s, Roland Boutiques, Erica Synths LXR, Behringer’s TD-6, as well as a variety of guitar pedals also worked instantly.

Another nice aspect of 3D printing is weight. Our double tiered stand was very sturdy, but incredibly lightweight. In fact, it seemed almost too light for its size, since other stands we tested were almost twice the heft as the Stack3D, but it was rock solid.

The best part? Stack3D’s two-tiered stand only costs $55.00, as opposed to $70 and higher for lesser quality, plastic offerings. Sure, custom wood options are available for much higher cost, but do you really want to spend $250 for a stand that holds a Volca? In addition, are you truly focusing on the aesthetics of your micro studio stands? What you’re looking for is functionality and that’s what Stack3D delivers.

“As a musician at heart, I’ve always been passionate about finding ways to improve my setup and workflow,” reveals David Gardner, founder of Stack3D. “With years of experience in the music industry, I understand the importance of having functional and reliable gear that enhances both creativity and efficiency. That’s what inspired me to launch Stack3d Solutions, LLC – a business born from the desire to create practical, high-quality stands for the music community and even more specifically guitar pedal stands for those of us that use effects pedals on our desks/tables.”

“Driven by innovation and a love for music, Stack3d Solutions is committed to providing high-quality, functional products for fellow musicians, and we’re excited to expand into new areas in the future.”

“The journey began when I noticed a lack of sturdy, customizable stands for effects pedals, synthesizers, and other essential music gear,” Gardner continues. Using my background in music and problem-solving, I started designing and 3D printing stand solutions that not only look great but also improve the ergonomics and organization of a musician’s setup.”

MIDI Designer Is Now Free!

MIDI Designer Pro X is now free to download! MIDI Designer Pro X is a professional-grade MIDI controller platform for iPhone, iPad and Mac. User-contributed layouts let you control everything from Ableton to Yamaha out of the box. Go beyond hardware and express your musical vision. Check out out now!

One downside to Stack3D Solution’s two-tiered stand is that it isn’t collapsible. Nor can you disassemble it to take to another location or a gig. We’re not sure what percentage of users are gigging with their micro studio stands, but if this is important to you, it’s a consideration.

The Stack3D stand isn’t completely free of 3D printing artifacts, but this “textured surface” was only on the underside of the stand – out of view.

The easiest way for electronic musicians to get their music onto Spotify, Apple Music, iTunes, Amazon Music, Tidal, Instagram, Facebook, TikTok, Pandora, Twitch & much more! Click the banner above or the Go Button to save 7% off of your signup!  Go!

Conclusion

If you’re looking for a study stand for your studio that won’t break the bank and offers a lot of value, you can’t go wrong with Stack3D Solutions two-tier stand. Highly Recommended.

Stack3D Solutions 2-Tier Stand Rating: 91%

Stack3D Solutions Stand costs $55.00.

The Future: Of course, we’d love to see three- and four-tiered solutions, but Stack3D will probably need to upgrade their 3D printers. Second, additional color options besides black would be welcomed. Finally, being that these stands are 3D printed, customization options, such as width and the distance between tiers would be welcomed.