ART Pro Audio has announced the Solo Series, consisting of three new single channel audio recording processors based on their popular designs.
FutureMusic may actually be only one of a few places you can read about this announcement, not because we’re brilliant, but because we just happened to stumble onto them at the NAMM show. It’s a shame they don’t put a ton of effort into their public relations, or marketing because they develop some terrific, bang-for-the-buck products that more people should know about…
ART Pro Audio Solo Series
The easiest way for electronic musicians to get their music onto Spotify, Apple Music, iTunes, Amazon Music, Tidal, Instagram, Facebook, TikTok, Pandora, Twitch & much more! Click the banner above or the Go Button to save 7% off of your signup! GO!
ART Solo Studio
The Solo Studio Multi-Voice Channel Strip allows users to choose between a low-noise / low-distortion solid state transistor circuit and a warmer Class-A tube mic preamp and tailor the sound with the Tilt EQ control. Featuring 48V phantom power, a front Microphone/Line balanced input or a high impedance Instrument input, users can sculpt vocals for clarity while the Tilt EQ can be used to emphasize high presence or low-end warmth. The SOLO Series of single channel rackmount units have been developed for the recording enthusiast with a preference for simplicity.
ART Solo Studio Features:
- 48 Volt Switchable Phantom Power
- Selectable Multi-Voice Tube/Solid State Control
- Hand selected 12AT7 Tube OPTO – Analog Optical Isolators (AOI)
- Optical Controlled Compression
- Pre-Compression Insert Loop
- Tilt EQ
- Selectable Low Cut Filter (HPF)
- Variable Threshold and Ratio controls
- Variable Attack and Release controls
- Variable Blend (Compression)
- Variable Output Level Control
- Frequency Response 15 Hz to 50 kHz (+0, -1dB)
- Dynamic range: >110dB (A weighted)
- CMRR: >90dB
- THD: <0.005% (typical)
- Equivalent Input Noise: -129dBu (XLR, A weighted)
- Maximum Input Level: +19dBu (XLR)
- Maximum Instrument Input: +17dBu
- Input Impedance: 47k ohms (XLR), >800k ohms (Instrument)
- Maximum Output Level): +27dBu (XLR)
- Output Impedance: < 47 ohms (XLR)
- Maximum Gain: 55dBMeter
- Power Requirements: 100-120V 60 Hz / 220-240V 50Hz rear mounted switch and IEC connector
- Dimensions: (HxWxD) 1.75-inch x 19-inch x 6.0-inch / 4.45 cm x 48.3 cm x 15.2 cm
- Weight: 5.6 lb / 2.5kg
ART created three new 1U rack recording processors based on their proven designs…
ART Solo MPA
The Solo MPA Multi-Voice Tube Preamplifier allows users to blend between a low-noise / low-distortion solid-state transistor circuit and a warmer Class-A tube mic preamp. Featuring flexible EQ controls, 48V phantom power and a variable input impedance control, users can tailor the Solo MPA to suit their microphone of choice, be it a high-quality dynamic, a studio-grade condenser, or a low-level ribbon.
ART Solo MPA Features:
- Adjustable input impedance (600 to 80K ohms)
- Flexible Tilt EQ
- Tunable Lowcut Filter
- Variable Voice Tube/Solid State Control
- Front accessible meter trim
- Discrete class A FET input microphone preamplifier
- CMRR: >90dB THD <0.005%
- Frequency Response: 15 Hz to 50 kHz (+0, -1dB)
- Front mounted Instrument/DI Input
- Very high input impedance
- +4dBu/-10dBV output level selection
- Dynamic range: >110dB (“A” weighted)
- Equivalent Input Noise: -129dBu (XLR, “A” weighted)
- Maximum Input Level: +19dBu (XLR)
- Maximum Instrument Input: +17dBu
- Input Impedance: 600-80K ohms adjustable (XLR), >800k ohms (Instrument), +27dBu (XLR)
- Output Impedance: < 47 ohms (XLR)
- Maximum Gain: 70dB
- Meter Calibration: 0VU = +4dBu output (+4dBu mode) 0VU = -10dBV output (-10dBV mode)
- Low Cut Filter: Single pole,10-200Hz adjustable +/- 12dB adjustable
- Power Requirements: 100-120V 60 Hz / 220-240V 50Hz rear mounted switch and IEC connector
- Dimensions: (HxWxD) 1.75-inch x 19-inch x 6.0-inch / 4.45 cm x 48.3 cm x 15.2 cm
- Weight: 5.6 lb / 2.5kg
Urban Rhythm — Backstory — New Release!
“Urban Rhythm serves as a testament to the limitless frontiers of sonic artistry, where the boundaries of imagination dissolve into a realm of poetic resonance and artistic revelation.”
Spotify | Apple Music | iTunes | Deezer | Amazon
ART Solo VLA
The Solo VLA Multi-Voice Tube / Opto Compressor was designed for applications where transparent, musical dynamic control is desired. The Blend control lets you combine the dry and processed signals for parallel compression, perfect for preserving your full dynamic range while adding fullness and sustain. Select between a solid-state path or a class-A vacuum tube gain stage for warmer saturation. Whether it’s to fatten up an instrument take, smooth out a vocal performance or prevent clipping while laying down tracks, the ART Solo VLA could be the right solution to elevate your productions to the next level.
ART Solo VLA Features:
- Selectable Multi-Voice Tube/Solid State Control
- Hand selected 12AT7 Tube
- OPTO – Analog Optical Isolators (AOI)
- Variable Threshold and Ratio Controls
- Variable Attack and Release Controls
- Variable Blend for Parallel Compression
- Selectable Level Modes(+4dBu/-10dBV)
- 20Hz to 80KHz Frequency Response (+0db+/-1dB)
- >100dB (20-20k Hz) Dynamic Range
- Power Requirements: 100-120V 60 Hz / 220-240V 50Hz rear mounted switch and IEC connector
- Dimensions: (HxWxD) 1.75-inch x 19-inch x 6.0-inch / 4.45 cm x 48.3 cm x 15.2 cm
- Weight: 5.6 lb / 2.5kg
*** These specs have not been independently confirmed by FutureMusic.
